The DX-Series is a complete 19-inch data-center rack in 42U and 47U heights, built on a welded frame to EIA-310-D and EN IEC 61587-1 and rated for a 1500 kg static load. Configured to your specification, welded and assembled in our own factory, and delivered across Europe in two to four weeks.
800 × 1200 mmWenvex is the data-center cabinet division of Vacuum El System, a precision welded-fabrication manufacturer supplying the semiconductor and machinery industries since 2001.
DX-Series cabinets are built to EIA-310-D (19-inch rack geometry) and EN IEC 61587-1 (mechanical structures for electronic equipment). Test and compliance documentation available on request.
The DX-Series meets the rail geometry, load rating, thermal and baying requirements data-center teams specify, built to EIA-310-D and EN IEC 61587-1, configured per project, and shipped on a two-to-four-week European lead time.
A 19-inch 42U/47U rack on a welded frame, built to EIA-310-D rail geometry and EN IEC 61587-1, with four depth-adjustable mounting rails, an 80% mesh front door, a 3-point latch and a 1500 kg static load rating.
Genuine manufacturer flexibility. Height, width, depth, doors, access control, side panels, roof and RAL colour are specified per order, with no fixed catalogue and no minimum order quantity.
Manufactured in our own facility in Bulgaria and delivered anywhere in the EU on a two-to-four-week standard build, with no overseas sourcing cycle and no container lead time.
We cut, weld, coat and assemble in-house rather than reselling. That is 25 years of precision fabrication for the semiconductor and machinery industries, applied to data-center hardware.
Both lines are welded in our own factory. Specify the DX-Series for standard 19-inch data-center deployments; specify W-Series when the application needs high-load construction, a non-standard height or secure multi-tenant colocation.
The standard 19-inch 42U/47U data-center rack on a welded frame, built to EIA-310-D and EN IEC 61587-1, with an 80% mesh door, four depth-adjustable rails, a 3-point latch and side-by-side baying.
Welded, high-load construction for demanding loads and secure multi-bay colocation, including bespoke builds, shown at Data Centre World London 2026.
A rack is only half a cabinet. We specify locking, thermal management and power distribution with the build, source them from established European vendors, and fit them in the factory, so what arrives on site is a working system, not a parts list.
Electronic locks & RFID access
Swing handles, electronic locks and RFID access control, the class of hardware trusted across enterprise and colocation racks, engineered into the door rather than retrofitted onto it.
Rack-door cooling units
High-density heat handled at the rack with rack-door cooling units, a real thermal answer for dense and HPC deployments, sized against the cabinet depth it ships in.
Metered & switched PDUs
Intelligent metered and switched PDUs, per-tenant energy metering and remote power management, specified with the cabinet and fitted in the vertical cable channel before it ships.
Start with the DX-Series standard rack and scale to complete rows, secure colocation and fully custom builds, all made in the same European facility.
▲ VENTED TOP · 80%◆ WELDED · 19″ RAILSWenvex is the data-center cabinet division of Vacuum El System, a Bulgarian precision manufacturer that has supplied welded and sheet-metal assemblies to the semiconductor and machinery industries since 2001. Cabinets are cut, welded, coated and assembled at our own facility in Yambol.
Request a quote, book a technical call with our engineering team, or get the DX-Series datasheet emailed to you straight away.
